Glass Blowing Supplies > Glass Blowing Tools > Ground Joint Tools 

Ground Joint Tools

Ground Joint Keck Clip - 14mm
10201-14

This is the Keck Clip for the 14mm ground joints. The clip holds together either the 14 female and the...[more]

$0.50
UnitsEACH
 Qty:
Ground Joint Keck Clip - 19mm
10201-19

This is the Keck Clip for the 19mm ground joints. The clip holds together either the 19 female and the...[more]

$0.50
UnitsEACH
 Qty:
Ground Joint Keck Clip - 24mm
10201-24

This is the Keck Clip for the 24mm ground joints. These Keck Clips are only available in white at this...[more]

$1.00
UnitsEACH
 Qty:
Ground Joint Keck Clip - 24mm Green
10201-24GR

This is the Keck Clip for the 24mm ground joints. Green [more]

$1.00
UnitsEACH
 Qty:
Ground Joint Keck Clip - 45mm
10201-45

This is the Keck Clip for the 45mm ground joints. These Keck Clips are only available in white and red....[more]

$1.50
UnitsEACH
 Qty:
Ground Joint Holder - 11mm Holds Female Ground Joints
GJ11F

The 11mm Female ground joint holder from WhatisArt holds the 11 Female by fitting a hollow graphite taper around the...[more]

$55.00
UnitsEACH
 Qty:
Ground Joint Holder - 11mm Holds Male Ground Joints
GJ11M

The 11mm Male ground joint holder from WhatisArt holds the 11 Male by fitting a hollow graphite taper around the...[more]

$55.00
UnitsEACH
 Qty:
Ground Joint Holder,Holds 19mm Male (25/7d) Herbert Arnold
HA VW1-00398

The 19mm Male tool from Herbert Arnold is a hollow aluminum taper, the interior is covered in graphite paper that...[more]

$92.00
UnitsEACH
 Qty:
Ground Joint Tool, Smooth Brass 14mm Female Joint
BLOG14

[more]

$85.00
Temporarily Out of Stock Request It!
Ground Joint Tool, Octagonal Brass 14mm Female Joint
BLOGR14

[more]

$85.00
Temporarily Out of Stock Request It!
Ground Joint Tool, Smooth Brass 19mm Female Joint
BOG19

[more]

$85.00
Temporarily Out of Stock Request It!
Ground Joint Tool, Octagonal Brass 19mm Female Joint
BOGR19

[more]

$85.00
Temporarily Out of Stock Request It!
Ground Joint Holder - 14mm Holds Female Ground Joints
GJ14F

This Female Holding tool from WhatisArt holds a 14mm Female ground joint by fitting into the ground end with a...[more]

$50.00
Temporarily Out of Stock Request It!
Blast Shield Ground Joint Holder - 14mm Holds Female GJ
GJ14F-B/S

This Female Holding tool from Blast Shield holds a 14mm Female ground joint by fitting into the ground end with...[more]

$50.00
Temporarily Out of Stock Request It!
Ground Joint Holder - 14mm Holds Male Ground Joints
GJ14M

The 14mm Male ground joint holder from WhatisArt holds the 14 male by fitting a hollow graphite taper around the...[more]

$50.00
Temporarily Out of Stock Request It!
Blast Shield Ground Joint Holder - 14mm tool Holds Male GJ
GJ14M-B/S

This Female Holding tool from Blast Shield holds a 14mm male ground joint by fitting into the ground end with...[more]

$50.00
Temporarily Out of Stock Request It!
Ground Joint Holder - 19mm Holds Female Ground Joints
GJ19F

This Female Holding tool from WhatisArt holds a 19mm Female ground joint by fitting into the ground end with a...[more]

$50.00
Temporarily Out of Stock Request It!
Blast Shield Ground Joint Holder - 19mm Holds Female GJ
GJ19F-B/S

This Female Holding tool from Blast Shield holds a 19mm Female ground joint by fitting into the ground end with...[more]

$50.00
Temporarily Out of Stock Request It!
Ground Joint Holder - 19mm Holds Male Ground Joints
GJ19M

The 19mm Male ground joint holder from WhatisArt holds the 19 male by fitting a hollow graphite taper around the...[more]

$50.00
Temporarily Out of Stock Request It!
Blast Shield Ground Joint Holder - 19mm Holds Male GJ
GJ19M-B/S

This Female Holding tool from Blast Shield holds a 19mm male ground joint by fitting into the ground end with...[more]

$50.00
Temporarily Out of Stock Request It!
Ground Joint Holder - 29mm Holds Female Ground Joints
GJ29F

The 29mm Female ground joint holder from WhatisArt holds the 29 Female by fitting a hollow graphite taper around the...[more]

$56.00
Temporarily Out of Stock Request It!
Ground Joint Holder - 29mm Holds Male Ground Joints
GJ29M

The 29mm Male ground joint holder from WhatisArt holds the 29 Male by fitting a hollow graphite taper around the...[more]

$56.00
Temporarily Out of Stock Request It!
Ground Joint Holder,Holds 24mm Female (25/6e) Herbert Arnold
HA VW1-00383

[more]

$84.00
Temporarily Out of Stock Request It!
    Shopping Cart Web Site -powered by MightyMerchant v4.6
Close
Sign up to our newsletter to be notified about our sales, industry news and new products!
Email Address