Glass Blowing Supplies > Glass Blowing Tools > Ground Joint Tools 

Ground Joint Tools

Ground Joint Keck Clip - 14mm
10201-14

This is the Keck Clip for the 14mm ground joints. The clip holds together either the 14 female and the...[more]

$0.50
UnitsEACH
 Qty:
Ground Joint Keck Clip - 19mm
10201-19

This is the Keck Clip for the 19mm ground joints. The clip holds together either the 19 female and the...[more]

$0.50
UnitsEACH
 Qty:
Ground Joint Keck Clip - 24mm
10201-24

This is the Keck Clip for the 24mm ground joints. These Keck Clips are only available in white at this...[more]

$1.00
UnitsEACH
 Qty:
Ground Joint Keck Clip - 24mm Green
10201-24GR

This is the Keck Clip for the 24mm ground joints. Green [more]

$1.00
UnitsEACH
 Qty:
Ground Joint Keck Clip - 45mm
10201-45

This is the Keck Clip for the 45mm ground joints. These Keck Clips are only available in white and red....[more]

$1.50
UnitsEACH
 Qty:
Ground Joint Holder - 11mm Holds Female Ground Joints
GJ11F

The 11mm Female ground joint holder from WhatisArt holds the 11 Female by fitting a hollow graphite taper around the...[more]

$55.00
UnitsEACH
 Qty:
Ground Joint Holder - 11mm Holds Male Ground Joints
GJ11M

The 11mm Male ground joint holder from WhatisArt holds the 11 Male by fitting a hollow graphite taper around the...[more]

$55.00
UnitsEACH
 Qty:
Ground Joint Holder,Holds 19mm Male (25/7d) Herbert Arnold
HA VW1-00398

The 19mm Male tool from Herbert Arnold is a hollow aluminum taper, the interior is covered in graphite paper that...[more]

$92.00
UnitsEACH
 Qty:
Ground Joint Tool, Smooth Brass 14mm Female Joint
BLOG14

[more]

$85.00
Temporarily Out of Stock Request It!
Ground Joint Tool, Octagonal Brass 14mm Female Joint
BLOGR14

[more]

$85.00
Temporarily Out of Stock Request It!
Ground Joint Tool, Smooth Brass 19mm Female Joint
BOG19

[more]

$85.00
Temporarily Out of Stock Request It!
Ground Joint Tool, Octagonal Brass 19mm Female Joint
BOGR19

[more]

$85.00
Temporarily Out of Stock Request It!
Ground Joint Holder - 14mm Holds Female Ground Joints
GJ14F

This Female Holding tool from WhatisArt holds a 14mm Female ground joint by fitting into the ground end with a...[more]

$50.00
Temporarily Out of Stock Request It!
Blast Shield Ground Joint Holder - 14mm Holds Female GJ
GJ14F-B/S

This Female Holding tool from Blast Shield holds a 14mm Female ground joint by fitting into the ground end with...[more]

$50.00
Temporarily Out of Stock Request It!
Ground Joint Holder - 14mm Holds Male Ground Joints
GJ14M

The 14mm Male ground joint holder from WhatisArt holds the 14 male by fitting a hollow graphite taper around the...[more]

$50.00
Temporarily Out of Stock Request It!
Blast Shield Ground Joint Holder - 14mm tool Holds Male GJ
GJ14M-B/S

This Female Holding tool from Blast Shield holds a 14mm male ground joint by fitting into the ground end with...[more]

$50.00
Temporarily Out of Stock Request It!
Ground Joint Holder - 19mm Holds Female Ground Joints
GJ19F

This Female Holding tool from WhatisArt holds a 19mm Female ground joint by fitting into the ground end with a...[more]

$50.00
Temporarily Out of Stock Request It!
Blast Shield Ground Joint Holder - 19mm Holds Female GJ
GJ19F-B/S

This Female Holding tool from Blast Shield holds a 19mm Female ground joint by fitting into the ground end with...[more]

$50.00
Temporarily Out of Stock Request It!
Ground Joint Holder - 19mm Holds Male Ground Joints
GJ19M

The 19mm Male ground joint holder from WhatisArt holds the 19 male by fitting a hollow graphite taper around the...[more]

$50.00
Temporarily Out of Stock Request It!
Blast Shield Ground Joint Holder - 19mm Holds Male GJ
GJ19M-B/S

This Female Holding tool from Blast Shield holds a 19mm male ground joint by fitting into the ground end with...[more]

$50.00
Temporarily Out of Stock Request It!
Ground Joint Holder - 29mm Holds Female Ground Joints
GJ29F

The 29mm Female ground joint holder from WhatisArt holds the 29 Female by fitting a hollow graphite taper around the...[more]

$56.00
Temporarily Out of Stock Request It!
Ground Joint Holder - 29mm Holds Male Ground Joints
GJ29M

The 29mm Male ground joint holder from WhatisArt holds the 29 Male by fitting a hollow graphite taper around the...[more]

$56.00
Temporarily Out of Stock Request It!
Ground Joint Holder,Holds 24mm Female (25/6e) Herbert Arnold
HA VW1-00383

[more]

$84.00
Temporarily Out of Stock Request It!
    Shopping Cart Web Site powered by MightyMerchant v4.6
Close
Sign up to our newsletter to be notified about our sales, industry news and new products!
Email Address