Blast Shield

Push-Graphite 1/2 Push-Graphite 1/2" with Stainless Pick by Blast Shield
16165

This 1/2" diameter graphite push comes with a sharpened stainless steel pick on the end.The pick both sizes the hole...[more]

Qty: EACH $35.00
Push-Graphite 5/8 Push-Graphite 5/8" with Stainless Steel Pick
16170

This 5/8" diameter graphite push comes with a sharpened stainless steel pick on the end.The pick both sizes the hole...[more]

Qty: EACH $35.00
Torch Marver- L-Shaped Graphite2 Torch Marver- L-Shaped Graphite2"X3" for Mirage,Blast Shield
40007-12

[more]

Qty: EACH $75.00
Torch Marver- L-Shaped Graphite for Bravo/Champ. BlastShield Torch Marver- L-Shaped Graphite for Bravo/Champ. BlastShield
40007-18

[more]

Qty: EACH $75.00
Blast Shield Push - Graphite 5/8 Blast Shield Push - Graphite 5/8"
16155

The graphite end of this reamer is a cylinder 5/8" in diameter and 3" long. The last half...[more]

$25.00 / EACH
Temporarily Out of Stock
Request It!
Blast Shield - Short Bunson Burner Torch Blast Shield - Short Bunson Burner Torch
16215

Short Bunson Burner for Lathe Work, The Middle Shaft is Square So The Ports Always Stay Aligned, Has 2 Screw...[more]

$135.00 / EACH
Temporarily Out of Stock
Request It!
Blast Shield - Ball Bearing Yoke Rollers Blast Shield - Ball Bearing Yoke Rollers
20106

Yoke rollers with ball bearings, adjustable height. [more]

$95.00 / EACH
Temporarily Out of Stock
Request It!
Marver- L-Shaped Graphite for 40mm Herbert Arn., Blast Shiel Marver- L-Shaped Graphite for 40mm Herbert Arn., Blast Shiel
40007-13

L-shaped graphite torch marver for 50mm Herbert Arnold Zenit. By Blastshield [more]

$75.00 / EACH
Temporarily Out of Stock
Request It!
Torch Marver - L-Shaped Graphite for Red Max Torch Marver - L-Shaped Graphite for Red Max
40007-15

[more]

$75.00 / EACH
Temporarily Out of Stock
Request It!
    Online Store powered by MightyMerchant v4.6
Content

Like us on Facebook & Get 5% off regularly priced merchandise!


LiveZilla Live Chat Software