A smaller version of Griffin's pedestal rollers, but with a ball bearing head. [more]

[more]

This 2" X 3" L-shaped marver pad can be used with the Carlisle Mini CC Burner. [more]

The shade is a 4” by 6” borosilicate plate with a stainless steel frame to protect the edges of the...[more]

Basic graphite bowl push, 3/4" in diameter. Made by Griffin Glass Tool, designed by Wil Menzies. Basic graphite bowl push,...[more]

Graphite 3" x 6" paddle with a brass counterweight, wood handle. Made by Griffin Glass Tools, designed by Wil Menzies....[more]

Graphite 3" x 6" paddle. 'The Ultimate' with a brass counterweight a notch for a punty and non-spinning design. Made...[more]

4" x 6" 'The Ultimate' with a brass counterweight, a notch for your punty and non-spinning design. Made by Griffin...[more]

The Rock-It 05 pedal is a non-electric on/off control for the outer fire of any two stage four inlet torch....[more]

The Rock-It 05 pedal is a non-electric on/off control for the outer fire of any two stage four inlet torch....[more]

The Griffin Glass Turbo Switch Foot Pedal can be used on GTT, Carlisle, and all other two stage torches. The...[more]

This two stage foot pedal is designed for use with any three stage torch. It's function is to open and...[more]

This graphite V-shaped blade is an excellent tool for creating very tight shaping and restrictions in either blown or solid...[more]

This brass V-shaped blade is an excellent tool for creating very tight shaping and restrictions in either blown or solid...[more]

[more]

This L-shaped marver is 2" X 3" and can be used with the Mid Range Plus, Major, and Red...[more]

This L-shaped torch mounted marver is 3" X 3" and can be used with Carlisle CC, Bethlehem Barracuda and...[more]

This L-shaped torch mounted marver is 3" X 3" For Phantom [more]

This L-shaped torch mounted marver is 3" X 3" and can be used with Carlisle CC, Bethlehem Barracuda and...[more]

This L-shaped torch mounted marver is 3" X 3" with Blast Shield for Carlisle CC+. [more]

[more]

[more]

[more]

Three hole graphite marble mold on an aluminum handle by Griffin Glass Tools. The holes measure approximately 5/8", 7/8" and...[more]

Graphite paddle, 2"x4" with wood handle and counterweight. Made by Griffin Glass Tool, designed by Wil Menzies. [more]

Graphite paddle, 2"x4" with wood handle, counterweight and notch. Made by Griffin Glass Tool, designed by Wil Menzies. [more]

3" x 4" graphite paddle with a brass counterweight and non-spinning design. Made by Griffin Glass Tools, designed by Wil...[more]

Graphite 4" x 6" paddle with a brass counterweight and non-spinning design. Made by Griffin Glass Tools, designed by Wil...[more]

Basic graphite bowl push, 5/8" in diameter. Made by Griffin Glass Tool, designed by Wil Menzies. Basic graphite bowl push,...[more]